Avaids provides neon
obstruction lights to mark high rise buildings, bridges, towers,
etc. Neon Obstruction Lights uses cold cathode light technology.
Neon Obstruction Light has recognized to be extremely better to
incandescent lights because of its low maintenance and low energy
consumption.
Neon Obstruction Lights are best suited in high vibration areas.
Our Neon Lights are using Metal Oxide Varistor to protect the transformer
and lamp against voltage fluctuations.
The Neon spiral lamp is operated through electronic power supply
which is housed inside the metallic enclosure of the light. Specially
designed copper R.F. Screen is provided to shield the lamp against
emission of R.F. The lamps will be individually connected through
the failure sensing changeover card located in the control cabinet.
The changeover of power from service lamp to standby lamp takes
place automatically, in the event of failure of service lamp.
Features :
- ICAO (Low Intensity Type ‘A’) compliant product
design and performance.
- Omni-directional RED light source hence no requirement of filters.
- Borosilicate glass dome.
- Aluminum Alloy housing.
- Excellent dust and moisture sealing.
- Wide operating temperature range (-10 ºC to +40 ºC)
CONTROL PANEL
The control panel is the housing for the Control Equipment:
- The control panel is of robust construction suitable for outdoor
use, it is made out of Cold Rolled sheet steel with Zinc coating
and is Epoxy Powder Coated for excellent Weather Protection.
- Control Panel conforms to IP 65 Classification for ingress protection.
Operating Conditions
| • |
Temperatures ranging
from (-40°C to
+50°C). |
| • |
Will withstand wind in excess of
150 mph (240 kph), (150 knots) |
| • |
Fog, Rain |
| • |
Humidity :98% |
| • |
Does not create Electromagnetic
Interference |
| • |
Does not create Radio Frequency
Interference |
Photometric Data
| Night Mode |
Red |
| Vertical Beam Spread |
|
| Horizontal Coverage |
360 ° |
| "Ground Scatter Light"
cut-off angle |
-5 °
|
| Flash Rate |
Stationery Mode |
Electrical Specifications
| Input
Supply |
System
Operating on DC Volts |
Current
(Amp) |
Volt Amps
(VA) |
| Min |
Max |
Min |
Max |
| 12V
DC |
1800 V |
.75A |
1.5A |
.135 |
.270 |
Light
Characteristics
| ICAO Type |
Type "A" |
| Light Source |
Neon
Lamp |
| Light Color |
RED |
| Intensity |
600000 cd
|
| Horizontal Divergence |
360 °
|
| Lamp Life |
20,000 hrs |
| Radial Emission |
As per CISPR 11 |
Physical Characteristics
| Body Material |
Cast
Aluminium |
| Lense Material |
Borosilicate Glass |
| Mounting |
|
| Height (mm/inches) |
|
| Width (mm/inches) |
|
Operation
| Minimum Autonomy |
24 hrs.
|
| Latitude Range |
1000 meter
|
| On/Off Level |
Automatic
|
| Illumination Technology |
Ionisation of Neon
Gas |
| Available Flash Patterns |
FPM |
| Color Technology of Neon Lamp |
Glowing of Neon |
Construction
| Lens Material |
Borosilicate
Glass |
| Sealing |
Silicon Sealeant
|
| Weight |
Kg Approx. |
Environmental and Electrical
| Temperature Range |
- 40
° C to + 50 ° C |
| Waterproof |
Through EPDM Gasket
and Sealant |
| Environment Protection Standard
for Light |
IP 65 Standard |
| Environment Protection Standard
for Control Panel |
IP 55 Standard |
Weight & Measurements (Shipping info)
| APPROX
SHIPPING WEIGHT |
|
VOLUME |
| Kg |
mm |
cu ft |
|
 |
