Avaids Technovators provides neon obstruction lights to mark high rise buildings, bridges, towers, etc. Neon Obstruction Lights uses cold cathode light technology. Neon Obstruction Light has recognized to be extremely better to incandescent lights because of its low maintenance and low energy consumption.

The Neon Obstruction Light system has two numbers of Low Intensity Lights conforming to ICAO (International Civil Aviation Organization) regulations. The system is energized through the Battery bank. The battery is charged by the Solar Panel, during the day, which convert the energy from the Sun into DC electricity .The solar charge Controller & Regulator cum Changeover Card. Neon Obstruction Lights are best suited in high vibration areas. Our Neon Lights are using Metal Oxide Varistor to protect the transformer and lamp against voltage fluctuations.

The Neon spiral lamp is operated through electronic power supply which is housed inside the metallic enclosure of the light. Specially designed copper R.F. Screen is provided to shield the lamp against emission of R.F. The lamps will be individually connected through the failure sensing changeover card located in the control cabinet. The changeover of power from service lamp to standby lamp takes place automatically, in the event of failure of service lamp.

Features :

• ICAO (Low Intensity Type ‘A’) compliant product design and performance.
• Omni-directional RED light source hence no requirement of filters.
• Borosilicate glass dome.
• Aluminum Alloy housing.
• Excellent dust and moisture sealing.
• Wide operating temperature range (-10 ºC to +40 ºC)

CONTROL PANEL

The control panel is the housing for the Control Equipment:

• The control panel is of robust construction suitable for outdoor use, it is made out of Cold Rolled sheet steel with Zinc coating and is Epoxy Powder Coated for excellent Weather Protection.
• Control Panel conforms to IP 65 Classification for ingress protection.
• It hoses the following components:
  • Solar Charge Controller
  • Regulator cum Changeover card
  • Outgoing/Incoming terminal Blocks.

  Solar Array

The solar array comprises of

• 1 No. 12 Volt 60 WP Solar Module

Batteries

The following is the specification of the batteries

• The battery bank is Sealed Maintenance Free, Jelly filled, Valve regulated, Lead Acid type.
• The battery bank is 1 No 12 V 80 Ah @ C10 discharge rate.
• (+) & (-) Terminals are marked in each cell for proper polarity identification.

Battery Box

Battery Box is made of cold rolled sheet steel with Zinc coated for excellent weather protection. The battery enclosure is supplied in knocked down condition and the assembly at site is facilitated with an assembly drawing annexed as annexure 1

Operating Conditions

Photometric Data

Electrical Specifications

Light Characteristics

Physical Characteristics

Operation

Construction

Environmental and Electrical

Weight & Measurements (Shipping info)